| Dimensions |
|
| |
|
| Overall Length |
4180mm |
| Width |
1780mm |
| Height |
1030mm |
| Wheel Base |
2415mm |
| |
|
| Total Weight |
990Kg (with Ford 302 V8 fitted) |
| |
|
| Weight Distribution Front / Rear |
45% / 55% |
| |
|
| Ground Clearance |
127mm |
| |
|
| Wheels Front / Rear |
7" x 15" - 17" / 9" x 15" - 17" |
| |
|
| Chassis Type |
Tubular Spaceframe |
| |
|
| Engine / Transmission Layout |
Mid Engine |
| |
|
| Engine Options |
Ford Small Block 289 / 302 or Rover V8 |
| |
|
| Transmission |
5 / 6 speed |
| |
|
| Fuel Tank Capacity |
18 Gallons (81liters) |
| |
|
| Suspension Front / Rear |
Double Wishbone / Reversed "A" Frames with top Link and
Radius Arms |
| |
|
| Suspension Springing |
Adjustable Coil over Shock Absorbers |
| |
|
| Brakes Front |
Ventilated Discs with 2 / 4 / 6 pot Calipers |
| |
|
| Brakes Rear |
Solid / Ventilated Discs with 2 /4 Pot Calipers |
| |
|
| Steering |
Rack and Pinion |
| |
|
| Bodywork |
Composite Laminate of either Glass Reinforced Fibre or
Carbon Fibre |
| |
|
| Windscreen |
Laminated Safety Glass (Clear or Tinted) |
| |
|
| Rear Screen /Side Windows |
Impact Resistant Acrylic |
| |
|
| Ventilation |
Screen de-misting & interior heating with dash level &
footwell vents / Air-conditioning / Removable roof top panels |
| |
|
| Instrumentation |
Speedo, Tacho, Fuel, Volts, Oil Pressure & Water Temperature |
| |
|
| Windscreen Wiper |
2 Speed Mono Wiper |
| |
|
| Interior Trim |
Any available colour in either leather or leatherette |
| |
|
| Lighting Front |
Main / Dip Headlights, Spot Lights & Indicators |
| |
|
| Lighting Rear |
Stop / Tail / Indicator clusters with Fog, Reverse & Rear
Number Plate Lights |
| |
|
| Seating Capacity |
2 |
| |
|
| 0 - 60 mph |
5 Seconds (Ford 302 V8) |
| |
|
| Top Speed |
165 mph (Standard Ford 302 V8 & 5 speed gearbox)
Higher top speeds are attainable with modified engines & gearboxes |
| |
|
| |
| The Tornado TS GT40 BASIC component
package contains the following items (Comprehensive kits also available)
Front body section with light boxes bonded in place.
Front hatch panel.
Rear body section with light boxes, inner wheel arches and bulkheads bonded
in place.
2 x Double skinned doors.
2 x Door pocket mouldings.
Double skinned roof centre section.
2 x Side sill mouldings.
Chassis with all mountings and brackets welded in the correct
position.
2 x Upper front wishbones.
2 x Lower front wishbones.
4 x Rear radius arms.
2 x Rear top links.
2 x Rear 'A' frames.
2 x Rear uprights.
4 x Rear radius arm 'U' brackets.
6 x Rear suspension rose joints.
Fasteners (nuts and bolts etc).
Construction manual.
Source: www.tornadosportscars.com
|
