Madabout Kitcars Forum - Ford pinto 2ltr

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)

- General chatter (https://madabout-kitcars.com/forum/forumdisplay.php?f=7)

- - Ford pinto 2ltr (https://madabout-kitcars.com/forum/showthread.php?t=6603)

malc13

9th January 2018 13:46

Ford pinto 2ltr

I have a JBA FALCON kitcar with a Ford Sierra (circ 1984) Pinto 2ltr engine. During an engine oil change the bottom part of the dipstick was broken off and lost. As this bit holds the max and min oil levels I am hoping that someone may be able to give me the measurements from the tip of the dipstick to the min and max markers and also the total length of the item. I can then weld a small section on. Any information would be very much appreciated.

oxford1360

9th January 2018 14:53

The pictures for this give you the answer -

https://www.ebay.co.uk/itm/New-Genui...QAAOSw42JZKAq9

malc13

9th January 2018 21:02

Many thanks for your help and quick response. It is very much appreciated. malc

All times are GMT +0. The time now is 22:38.