Andy K's Vitesse based car
 

Last year I sold a kit to Andy who is building a Vitesse / GT6 based car ...Vitesse chassis , engine and box and GT6 axle and suspension components ...well Andy wanted some changes to his frame and we duly obliged ...

https://i.ibb.co/mT7ZcXd/20190410-183112.jpg

I added some seat belt mounts , extra bracing on the fuel tank and stuff like that ..

Whilst it was here , Andy broke his wrist ! So has asked us to do some extra jobs like hang and latch doors , boot and bonnet , repair bulkhead , floor pans , fit some inner wings etc ...that sort of stuff .. here's some progress pictures in no particular order ....

https://i.ibb.co/JjFtsh2/20190418-160310.jpg

https://i.ibb.co/NtXvfnk/20190418-160218.jpg

https://i.ibb.co/XJh6kR8/20190418-160409.jpg

https://i.ibb.co/VNw9Jyc/20190426-173313.jpg

https://i.ibb.co/tYD8FYh/20190426-173330.jpg

https://i.ibb.co/kHnQZ4d/20190426-175118.jpg

https://i.ibb.co/MZ8DjZd/20190426-173230.jpg

Few hours on this one this week ...Fully boxed in boot floor and inner arches as well as radiusing the rear arches ..30'' overall , same as fronts and glassed an inner lip or return edge in place too using my templates ...

https://i.ibb.co/HNKr0f1/20190503-151651.jpg

https://i.ibb.co/TY0zWvH/20190503-151723.jpg

Front inner arches mounted - top half on bonnet ,
bottom half on chassis ... bonnet latches on ( the D type style quarter turns that are proving popular ) , few other jobs done T handle on boot , door skins bonded to frames fitted with CBS Bear claw latches , dash cut , gear stick remote extended , wooden fixing blocks glassed in to fit grille etc etc.. ..

https://i.ibb.co/TWrg2jk/20190514-111918.jpg

https://i.ibb.co/2SBLMt2/20190514-111748.jpg

https://i.ibb.co/p4fPn9Z/20190514-111849.jpg

GRILLE IN ....

https://i.ibb.co/znmD9Kg/FORR.jpg

FUEL CAP FITTED

https://i.ibb.co/3FbZD2x/FORRR.jpg

HANDBRAKE DONE

https://i.ibb.co/G7bz59V/20190524-180534.jpg