:thumb: Looking very good. Keep us posted on progress.
John |
More pictures from today added
|
Well have been busy trying to get the front section finished will be a week at it to get it 100% perfect a good bit of sanding left
I had to put in a whole new section as the previous owner decided to cut it all away :angryfire: http://img812.imageshack.us/img812/7...nday001.th.jpg http://img844.imageshack.us/img844/5598/nowww002.th.jpg The front slam panel i got mad up http://img585.imageshack.us/img585/6092/nowww001.th.jpg The slam panel fiber glassed in place http://img695.imageshack.us/img695/1581/nowww003.th.jpg |
Put in the front slam panel cut this out to fit then fiberglass it
http://img695.imageshack.us/img695/1581/nowww003.th.jpg http://img100.imageshack.us/img100/9995/help001.th.jpg A layer of filler to get it 100% http://img140.imageshack.us/img140/1739/help002.th.jpg The fake calipers re-stickered with Lambo stickers and re-lacquered http://img227.imageshack.us/img227/6984/help003.th.jpg The brackets on the rear of the caliper i sprayed them with heat resistant paint http://img812.imageshack.us/img812/7946/help004.th.jpg The disk sprayed with heat resistant paint just waiting to finish the middle insert and spray that black http://img98.imageshack.us/img98/2637/help005.th.jpg |
Caliper on the car
http://img151.imageshack.us/img151/4...iper001.th.jpg The front coming along http://img24.imageshack.us/img24/2982/now001.th.jpg The bonnet getting filled and sanded http://img16.imageshack.us/img16/9963/now002.th.jpg |
Impressive!
|
Very nice - But why have you painted the discs? Even if it is heat resistant, The first time you hit the brakes the pad friction will strip the paint of the face of the disc...
|
There fake caliper and disks they dont work there only there for show :eusa_drool:
Quote:
|
Well have been busy and freezing with the cold
Sheeting into the front of the car to block off the front compartment http://img21.imageshack.us/img21/7787/sean002.th.jpg Lots od sanding and the gas struts all put back together http://img593.imageshack.us/img593/2034/sean003.th.jpg Expandable foam all filled the front wings there solid now http://img716.imageshack.us/img716/5606/sean004.th.jpg http://img687.imageshack.us/img687/237/sean005.th.jpg The middle section being covered up http://img819.imageshack.us/img819/5605/sean006.th.jpg |
Here is some pictures i took yesterday lots of sanding going on as im trying to get
the front section finished. http://img43.imageshack.us/img43/4723/lambo001.th.jpg http://img227.imageshack.us/img227/5125/lambo002.th.jpg http://img9.imageshack.us/img9/5551/lambo003.th.jpg http://img600.imageshack.us/img600/204/lambo004.th.jpg http://img413.imageshack.us/img413/3474/lambo005.th.jpg http://img194.imageshack.us/img194/646/lambo006.th.jpg http://img819.imageshack.us/img819/9070/lambo007.th.jpg http://img228.imageshack.us/img228/3192/lambo008.th.jpg |
|
My new tool box girlfriend baught me for Christmas:bounce:
http://img98.imageshack.us/img98/1016/hellllo001.th.jpg http://img28.imageshack.us/img28/4392/hellllo002.th.jpg http://img841.imageshack.us/img841/7...lllo003.th.jpg http://img339.imageshack.us/img339/7...lllo004.th.jpg Lots of sanding going on http://img84.imageshack.us/img84/7125/hellllo005.th.jpg http://img824.imageshack.us/img824/5...lllo006.th.jpg http://img841.imageshack.us/img841/4...lllo007.th.jpg http://img534.imageshack.us/img534/6...lllo009.th.jpg The fuel cap & engine cover cables all run and working perfect just have to mount my new levers http://img218.imageshack.us/img218/7...lllo008.th.jpg |
Made the template for the roof lining and it has been sent off to be leathered in black with white diamond stitching the same as the seats are going to be done should look the bomb
http://img811.imageshack.us/img811/8883/new001.th.jpg http://img132.imageshack.us/img132/7113/new002qt.th.jpg http://img210.imageshack.us/img210/1682/82954811.png Uploaded with ImageShack.us |
Got the sheeting cut out for the turbo intercooler housing that will feed air from the side skirt up into the intercooler all metal sealed with under seal
http://img543.imageshack.us/img543/977/noww001.th.jpg http://img695.imageshack.us/img695/152/noww002.th.jpg Intercooler at the side of the car http://img52.imageshack.us/img52/470/noww003.th.jpg Looking up from the ground into the tunnel http://img545.imageshack.us/img545/3285/noww004.th.jpg All sealed http://img17.imageshack.us/img17/3581/noww007.th.jpg http://img841.imageshack.us/img841/4558/noww008.th.jpg Got some mesh for the side skirts http://img408.imageshack.us/img408/7439/noww005.th.jpg |
Hi i have been contemplating changing the bulk head as i wasn't happy with the flock so i used filler and im going to smoothen out the back bulk head i think it would look much better
http://img405.imageshack.us/img405/7...wwww001.th.jpg http://img8.imageshack.us/img8/4396/...wwww002.th.jpg http://img413.imageshack.us/img413/6...wwww003.th.jpg |
What headlights are you using?
|
Peggy use Photobucket... It would be nice to see what you are building!
|
All times are GMT +0. The time now is 17:08. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022