Madabout Kitcars Forum

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)
-   Marlin 5exi builds (https://madabout-kitcars.com/forum/forumdisplay.php?f=11)
-   -   measurement of carrier needed! (https://madabout-kitcars.com/forum/showthread.php?t=2593)

craig 7th May 2010 18:45

measurement of carrier needed!
 
Can anyone give me the measurement of center of carrier to upright hole to center of carrier to caliper hole for the rover rears please?

Standard calipers

Cheers
Craig

eaa53 10th May 2010 08:16

Craig

I can post you a picture of my Rover set up but its non-standard and I am not sure what measurement you are after.

I put my Rover clipers at the front of the upright but then to confuse I fitted the modified Left upright to the Right and vice-versa. My handbrake now loops round nicely behind the drive shaft and TD have done a set up so it must be okay.

Or you can ring TD and speak to Dave, he has scale drawings available to him and may assist you to solve your problem.

He also now has a bolt on kit for a dramatically redesigned rear suspension that has to be seen to be believed - and its bolt on!

MikeR has had it fitted so he its fit to comment on the handling.


All times are GMT +0. The time now is 15:04.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022