Madabout Kitcars Forum

Madabout Kitcars Forum (http://www.madabout-kitcars.com/forum/index.php)
-   Old No.7 Builds (http://www.madabout-kitcars.com/forum/forumdisplay.php?f=26)
-   -   Welsh Kiwi's Build Thread - 275GTB (http://www.madabout-kitcars.com/forum/showthread.php?t=6476)

Welshkiwi 4th May 2018 04:25

Quote:

Originally Posted by molleur (Post 94691)

Thanks Molleur/LLM.

These were the replicas I had seen on Ebay, but due to me being over here they are going to set me back at least $2000NZD without rubber wrapped around them, so a bit on the high side at this early part of the build. Struggling to get the "steel look wheels" out here also which may give me an option of self manufacturing a set with spinners on. At this moment just canvassing to see if any options out there lurking in the garden sheds but still a way off for final decision. But if something trucks along at the right price then that is always the time to buy it! Cheers.

peterux 4th May 2018 06:59

I presume you've looked at these?
https://m.ebay.com.au/itm/4-Alcar-st...oAAOSwrIlau-KV

Welshkiwi 4th May 2018 07:08

Quote:

Originally Posted by peterux (Post 94704)

Hi Peterux, thanks for finding these! Yup had seen the same on eBay uk, but looks to be slightly better price on au site. Will hang fire on making a decision on homemade until the kit arrives and I have an idea of what the arch line/offset may need to be. Kinda assumed the Dunlop remodels already available would fit the bill. First choice would be wire wheels which may mean a budget blowout! Cheers.

Jaguartvr 4th May 2018 07:15

Smash got his Dayton chrome knock-off wire wheels from Dayton Austrailia. Got to be cheaper shipping to you.

Chrome wire wheels really are the finishing touch, it's what your credit card is for.

Welshkiwi 4th May 2018 07:26

Quote:

Originally Posted by Jaguartvr (Post 94709)
Smash got his Dayton chrome knock-off wire wheels from Dayton Austrailia. Got to be cheaper shipping to you.

Chrome wire wheels really are the finishing touch, it's what your credit card is for.

Thanks Jag, I also have a custom wire wheel maker in Christchurch that I am talking to as well. Just been trawling the Dayton site amongst others and yes, the credit card is under starters orders!
My gut says it has to be wires to be happy so looks like I will need to make it so! I hang until I have the body on the car so at least I get all the measurements I need to “one shot it”.

Mister Towed 4th May 2018 07:38

Quote:

Originally Posted by peterux (Post 94704)

They look nice in the pictures but they're ET47 so are likely to look very tucked in for a 60's Ferrari.

Once you've taken some measurements to see how much width within the arches you have to play with, I'd be looking for wheels with an ET of around 18 to 20 to give a far more period 'dished' look.

These were BMW 5 Series 6.5x15 steels with an ET of 20 that I drilled and painted to look like Dunlop alloys (although I was going to put Campagnolo stickers on them just to cause a little confusion and throw people off the replica scent) -

http://i1301.photobucket.com/albums/...pst1whs1gr.jpg

I paid £78 for the set of four, which included delivery from Germany. It took two days to give them a clean and drill all the holes and I spent roughly another £20 on three cans of Smoothrite to give them the aluminium look finish, so the total was about £25 per wheel.

They're now fitted to Casamolino's very nice 250 SWB Coupe and you can decide for yourself whether it's the look you're going for -

http://i167.photobucket.com/albums/u...9/DSCF1718.jpg

http://i167.photobucket.com/albums/u...9/DSCF1720.jpg

Good luck with your project, I'm really looking forward to see it progress.

Welshkiwi 4th May 2018 07:44

Thanks Mr Towed.
 
Thanks Mr T, those look a very good option.

Thanks for explaining the offsets and considerations as well, without a shell and the actual sizes it is pretty confronting trying to work out what may look good or would be a complete failure. The experiences of others though certainly helps. Cheers, really appreciated and as far as the build goes I really am looking to do this car as much justice as I can. I am an aircraft engineer by trade, so got some skills to work with but it will be slow and steady for this build! Thanks again....

Mister Towed 4th May 2018 14:24

No problem WK. BTW, I'm a qualified aeronautical engineer too, but military trained and an armaments specialist.

We (armourers) had access to a comprehensive tool kit containing mostly precision hammers in all sizes from XL to 4XL. Having said that, we also used needle files and the like when servicing, repairing and modifying small-arms.

I spent my second career just pushing bits of paper and people around (police officer) and now work part time in Education, so picking up some hand-tools and creating something fulfils a primeval need in me.

Now what are you doing sitting here reading this? There must be something you could be doing on your car...

Welshkiwi 4th May 2018 19:18

Quote:

Originally Posted by Mister Towed (Post 94728)
No problem WK. BTW, I'm a qualified aeronautical engineer too, but military trained and an armaments specialist.

We (armourers) had access to a comprehensive tool kit containing mostly precision hammers in all sizes from XL to 4XL. Having said that, we also used needle files and the like when servicing, repairing and modifying small-arms.

I spent my second career just pushing bits of paper and people around (police officer) and now work part time in Education, so picking up some hand-tools and creating something fulfils a primeval need in me.

Now what are you doing sitting here reading this? There must be something you could be doing on your car...

I hope your precision hammers were looked after the same way a surgeon looks after his scalpels! Very interesting career sir, I can see where the hobbyist comes out in you and the practical side shines through. If I need a “Bond-esque ” ejection seat for SWMBO and I can’t work it out myself i’ll Give you a nudge! It is 6am over here on a weekend. Sleep is not something that comes easy at the moment with my mind churning over my plans and until the donor comes off the road in about 6weeks the only real work I can do is minimal. Just waiting for that kit to ship and everything starts a bit more in earnest! Cheers

Welshkiwi 5th May 2018 11:05

More work progressing
 
Hi guys, just spoke to Chris and progress going really well. Should be finished and packed now for middle of next week and on its way to me. Really looking forward to that feeling. The detail work is going on so soon we should have pictures of the finished piece.

Here's the work that has been going on with front bumpers and headlight surrounds/buckets/covers - You can really see the vintage face forming now.

https://farm1.staticflickr.com/968/4...fa716c33_z.jpgFront bumpers and headlight buckets

Barber 5th May 2018 13:10

That looks really good.

redratbike 5th May 2018 15:26

Quote:

Originally Posted by Barber (Post 94746)
That looks really good.

Even better than really good I think!!!!

molleur 5th May 2018 18:14

Nice!

Lucky@LeMans 5th May 2018 23:18

Quote:

Originally Posted by Welshkiwi (Post 94745)
Hi guys, just spoke to Chris and progress going really well. Should be finished and packed now for middle of next week and on its way to me. Really looking forward to that feeling. The detail work is going on so soon we should have pictures of the finished piece.

Here's the work that has been going on with front bumpers and headlight surrounds/buckets/covers - You can really see the vintage face forming now.

https://farm1.staticflickr.com/968/4...fa716c33_z.jpgFront bumpers and headlight buckets

Are those light covers still the TVR ones like Kidges or a more up to date / improved version on the same theme ? The proportions on the front end look a little better some how. Is the lower valance still a separate item as per Kidges car ?

Welshkiwi 6th May 2018 01:40

Quote:

Originally Posted by Lucky@LeMans (Post 94753)
Are those light covers still the TVR ones like Kidges or a more up to date / improved version on the same theme ? The proportions on the front end look a little better some how. Is the lower valance still a separate item as per Kidges car ?

Hi LLM, Yup still TVR Griffith headlight covers. Only change has been new buckets for the headlights to fit into, slight change in proportions etc. The front is one piece, as the bumpers are fibreglass not huge weight to lift. Only a 4” trim to each end of front bumper alloy assy to allow the clam to lift over it.

Other than that front end is from same original mould. Side indicator positions are being done on monday, I have spec’d them frenched in and in a revised position to how Kidge had them. Cheers.

Paul L 6th May 2018 08:13

This does seem to get better and better with every photo. :cool:

Welshkiwi 6th May 2018 08:34

Quote:

Originally Posted by Paul L (Post 94767)
This does seem to get better and better with every photo. :cool:

Cheers Paul, same sentiments from me. Heavily biased of course from my side but feel it is forming up really well.

Welshkiwi 8th May 2018 06:40

Very close now
 
Hi guys,

Hope all of you lucky blighters that got to go to Stoneleigh enjoyed it and got to spend all your hard earned cash on improvements or new projects!

As for my project we are close to finalised production. The guys are working on Side indicators, final brackets for the rear bumper and finishing bits. Will speak to Chris later but expecting all on plan to finish in the next two days. Here's whats going on:

https://farm1.staticflickr.com/969/4...53caee05_z.jpgrear bumper splash moulds and position

Rear bumper in position - Splash moulds being taken for bracket profiles. (A very sexy rear end!)

https://farm1.staticflickr.com/979/4...b0d714b9_z.jpgside indicator position 1

Side indicator position for frenching in - Can't see indicators as they are with me!

https://farm1.staticflickr.com/967/4...3dfa7df0_z.jpgside indicator position

molleur 8th May 2018 17:02

Very well done!

Welshkiwi 10th May 2018 05:15

The guys have done me proud!
 
Well guys, we got there, the kit is finished and being packed up/shipped today.
I can only say that I am incredibly happy at this point with what the photos show. I think it is stunning and testament to the blood, sweat and likely tears/beers that have had to go into this from Chris and Dan. I now have transported back 40 years to my early childhood and cannot wait to unwrap what Santa is going to bring me. 1st stage job very well done - Now the scary bit - I get my hands on it.

https://farm1.staticflickr.com/905/2...e291b521_z.jpgDressed front pre-delivery

https://farm1.staticflickr.com/964/4...57373a47_z.jpgDressed rear - Pre delivery

Have also started a detail conversation with the LVV certification guy over here, a few trip ups that I hadn't captured that may revolve around the roof support and airbag removal, but shouldn't be anything that can't be sorted.
(Motorsport type regs as well as new seatbelts required, i'll keep you updated) More photos soon.


All times are GMT +0. The time now is 11:35.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2014