JZR 3 Wheeler wiring loom
 

Hi all.
I'm new to the forum and very new to the whole kit car thing.
I'm trying to get some information for my uncle who is trying to put back together a 24 year old JZR with a Honda GL500 engine.
We have now got to the point of replacing the wiring loom which needs to be replaced and half of it is missing.
Does anyone know if there is a suitable wiring diagram out there and may be point us in the right direction.

Many thanks in advance.

As nobody's offered anything yet I'll do my best as a seasoned kit car builder but absolutely no motorbike knowledge! My suggestion is to go about it in a logical manner...... list all items (maybe on a plan drawing of the car) eg RH rear light, RH brake light, RH indicator etc etc, with number of wires gauge (load in Amps) etc. If possible get a Haynes manual or similar for the donor motorbike engine, and just work through it 'in small pieces'. The plan drawing will come in useful to work out length of wire needed, then just order wire, connectors etc and get cracking with it. Good luck.

Have you looked through this archived website

http://www.oocities.org/motorcity/3102/index.html