I think Lidge used the J strip. It is after last summer's Tribute meet iirc correctly
|
googling away...
|
Quote:
Or as a work colleague says GTS ‘google that shit!’ |
"GTS" it is!
|
6mm aluminum trim for coupe above the window frames.
got mine from wilco's as someone else suggested comes in 2 mtre length |
Quote:
|
Need some advise.
Fuel fill dilemma I have a Cobra style flip top cap recessed in top of rear fender like many have used. The fill used 2 inch ID hose. How did you get from the Z3 filler tube to the cap? Reducers and smaller fill hose? Ultra flexible fill hose that CBS sells (which ID)? I'm ready to cut up some exhaust tubing bends and make a weldment if necessary. Help please. |
Have you read jagtvr's fitting for the relocated filler. Describes all the components required.
|
Quote:
for a more direct fill. Again, some have done this before. |
If you mean like the Kobras try the Tribute page on Facebook.
|
Don't do facebook!
|
I have just asked for a step by step guide with parts and suppliers. On the Facebook page.
|
Quote:
|
Sorry but on holiday with limited internet. Before I left I spoke to the chap who has taken over nobodi, he is using a larger diameter flexible pipe that fits OVER the original filler and is then necked down to fit the filler cap. Looks like a good idea.
|
Quote:
Thanks, much appreciated. |
I know that Kent is not exactly handy for Florida, but Car Builder Solutions stock lots of fuel system parts (as well as lots of other goodies).
https://www.carbuildersolutions.com/en/fuel-system SIMMO |
Quote:
Nubodi also replied directly and was very helpful. |
Sorry for the delay, I was away and trying to get stuff from FB to this site on a mobile phone defeated me. Looks like things have moved on anyway. The reply from Belinda Jane Wednesday relates to the new build agent mentioned above.
http://i68.tinypic.com/2zoiyo8.png http://i64.tinypic.com/2qjkrc1.png |
Thank you! Much appreciated
Jack |
hi Jack
If you want to write directly the contact us webpage with email addresses can be found here : https://www.classiccoachworks.org/contact/ Hope that helps. Dave |
All times are GMT +0. The time now is 03:31. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022