Madabout Kitcars Forum

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)
-   Miglia Builds and discussion (https://madabout-kitcars.com/forum/forumdisplay.php?f=21)
-   -   miglia france (https://madabout-kitcars.com/forum/showthread.php?t=4428)

rattler 23rd July 2013 16:16

miglia france
 
hi all just joined the clan of car builders . have orderd akit from mike and I must say what a gent he is most helpful and customer service top noch the kit will be ready in two weeks .I have stripped the donor all good bit of rust but all wealded up frame dropped on b/h spot on.will post pics if I can work out how.must say thanks mike without your help it would be difficult . my s/law has sammio and raced it in local g/prix great fun. I raced my lomax .may be mig/sam/rib /meeting next year .tents on the lawn maybe .next thing big shopping list and get the kit to france hopefully by sept I am lucky as it will be my full time project regards dave randall

tlrtone 23rd July 2013 16:30

Welcome Dave.

Post some pictures when you get a chance and let us see how you are getting on!

:pop2:

phil9 23rd July 2013 18:17

welcome be nice to see your car

Mister Towed 23rd July 2013 18:36

Hi Dave, welcome to the fold. Cross Channel meet next year sounds good to me. If you already have a Lomax you'll fit right in with the Sammio/Ribble/Miglia crowd. Looking forward to seeing build pictures. Lots of build pictures :)

mikmiglia 23rd July 2013 19:26

Lovely to meet you Dave, and your more than welcome thats what i am there
for.

Welcome to the forum mate , and fire away with the pictures.:wave:

rattler 23rd July 2013 20:11

miglia france
 
thank you I am sure there will be lots of questions as I am not familiar with triumphs

micky1mo 23rd July 2013 20:14

Welcome rattler.

An annual French rally of Sammio. Ribble and Miglia cars:icon_idea:

Now that could turn into some think really interesting:high5: :high5:

rattler 2nd August 2013 19:42

miglia france
 
hi all has anyone got a spit tank for sale dave r

rattler 6th August 2013 16:12

hi all just to say I have now got a tank ta dave r

rattler 15th August 2013 13:35

hi all I am abit worred about tyre size is there a prob with the b/h as its a f/glass one or is it just the chassi rail car will be in france in two weeks will post pic then dave r

tlrtone 15th August 2013 13:43

Dave, my tyre size is 185/65R15 on 15 inch wires which are 6J (6 inches wide)
I have had to put a 25mm sleeve on the steering rack to restrict the full lock and it doesn't hit anywhere now.

the issue is with 14" or 15" rims with tall tyres (ie 80 profile) where the fronts touch on the front chassis outrigger on full lock. On my Sammio I had 15" wires with 80 profile tyres and just never went to full lock and it was fine - but I was sitting in the car doing the MOT test and never went to full lock, so MOT tester never saw it touch!

The rears have plenty of clearance whatever wheels/tyres you put on (unless they are tractor tyres!!)

Anyway, I am expecting also to modify the wheel arches a little on the body to accommodate the larger tyres and give me adequate clearance, and hopefully I will check that out this weekend when I get my body. I will post pictures soon.

have a look at my blog (www.mymigliaspeedster.co.uk) for details of my steering rack modification.

Cheers
Tony

tlrtone 15th August 2013 13:45

This is where the problem lies....

http://www.mymigliaspeedster.co.uk/b...2012.25.25.jpg

but bear in mind the size difference between the standard 13 inch wheels on 4.5J (4.5 inch wide) rims and my 15 inch 6J rims with 185/65 tyres....

http://www.mymigliaspeedster.co.uk/images/wheels.jpg

rattler 15th August 2013 15:33

hi t read your blog all the time my wheels are 14 s so I m thinking on 165/70 14 but will wait to see pic of your body on /hope you don't mind/ have you uprated your s/asorbers I have got a s/spring and uprated r/bar fuel tank/fuel /brakes lines/ barn all clean and tidy just need the car dave r:ohwell:

Jerome 15th August 2013 16:15

Hello,

I,of course,had the same problem....14inch with 165/70 tyres will fit.

For the looks I would like higher tyres and if I could change things I
would change the bulkhead and chassis.(maybe I will in the future)

tlrtone 15th August 2013 17:10

Quote:

Originally Posted by Jerome (Post 45987)
Hello,

I,of course,had the same problem....14inch with 165/70 tyres will fit.

For the looks I would like higher tyres and if I could change things I
would change the bulkhead and chassis.(maybe I will in the future)

I was going to do the same Jerome - move the front outrigger back 100mm.
Since the Miglia bulkhead is back further and uses a fibreglass bulkhead it is actually a really easy answer. The problem is the inspection and I didn't want to jeopardise the registration process that we have to go through here.

Dave - if you want to move the front outrigger back, then that is the easier answer and will solve any wheel/tyre issues. All you will need to do is trim the front floorpans down to match. Simples!

tlrtone 15th August 2013 17:15

Quote:

Originally Posted by rattler (Post 45985)
have you uprated your s/asorbers I have got a s/spring and uprated r/bar fuel tank/fuel /brakes lines/ barn all clean and tidy just need the car dave r:ohwell:


Dave - I have got a Swing-spring on the back - not lowered at all yet - I will adjust when I get the body on. with the Sammio I built, I started with an 80mm lowering block on the back and ended up with 20mm so think time I will wait before I set up the rear.

At the front I have the standard shocks and springs - the springs are just cut 70mm shorter for now. I have an 7/8 anti roll bar to put on as well that is in my garage awaiting painting!

I figure that I want to get it on the road and then I can swap suspension parts easily if need be as everything is accessible. I had standard on the Sammio Spyder with a 1600 Vitesse 6 cylinder engine and had no problems.. I didn't race it like you will, so maybe you need to get it all uprated from the start!

rattler 15th August 2013 19:11

hi not going race the miglia just for show and the wife. hope to get another lomax to race so much fun so just s/shocs/stiffer r /bar idont know if my wheels are 4half 5 or 6 thay are sill in the u/k so wiil decide when thay arrive found a local tyre /f 300euro for 4 fitted dave r

davecymru 15th August 2013 20:16

Based on what troubles I (and Tony and others) had with 15's on the Sammios and the amount of cutting/welding and whackin required, I'd certainly go with 14's next time!

Mister Towed 16th August 2013 09:48

I'm running 175/70/14's on 4 1/2" MGB wires. I've lowered mine 75mm at the back and 90mm at the front. I didn't have any problem with the front outriggers fouling, but needed to move the bulkhead back 20mm and 'adjust' the front faces of the footwells inwards slightly with a lump hammer to get the front tyres to clear -

http://i1186.photobucket.com/albums/...vidpics318.jpg

http://i1301.photobucket.com/albums/...psa990cd82.jpg

The lower you go at the front the more likely the tyres are to foul the bulkhead as it's angled forwards towards the top. Phil J hasn't lowered his cars quite as much as I have and is able to use 175/80/14's without any clearance issues.

http://i1301.photobucket.com/albums/...ps29222155.jpg

I rather like the look of the taller tyres and I'm going to raise my suspension (and put softer springs on the front) over the winter so I can fit some to mine, both for the looks and to soften the ride a little, which blurs your vision on rough roads at the moment :wacko: . Although I like really low cars I don't think a slightly higher ride height spoils the Spyder shape at all.

rattler 16th August 2013 19:18

hi all thanks for your help lots to think about but no rush dave r


All times are GMT +0. The time now is 17:48.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022