Engine mounting bracket bolts
Here's a little tip to other BMW Sportster builders.
The Marlin supplied engine mounting brackets are much thinner than the orginal BMW alloy ones, so you need to use shorter bolts. I thought I'd use the originals which, as I tightened them up, hit the bottom of the tapped hole in the engine block. :eusa_naughty: I foolishly snapped one off in the block today ! :eusa_doh: Now i'll have to spend time extracting it before I move on! :cry: best regards to other builders, Peter |
Good tip!
I've been replacing bolts as I go so I didnt run into this one - I order the big selection pack from http://www.namrick.co.uk/ (and then a second one later) |
All times are GMT +0. The time now is 16:34. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022