[IMG]http://i1363.photobucket.com/albums/...ps2fefd4f0.jpg[/IMG]
bit out of sinc bonnet wedge in poss before bonding mini b/heads

hi tony nice to hear from you the village g/prix is w/e 28 june so you have time 4 spare beds here open invitation if anyone is interested will call round next time I am in u/k rattler

hi all anyone tell me best place to fit water temp sender. not much progress nasty cold .fited bonnet pop ups and pins/elec/fan /ran all wires in plastic conduet just fuse board to fab/just waiting for a parcel from u/k with all the bits pics to follow at w/e rattler

hi rattler
the best place to fit a temp sender is around the cylinder head where the top hose returns back to the radiator, usually near the thermostat either in the head or thermostat housing. electric fans have there switches usually in the top hose so it can sense when the engine is hottest and requires additional cooling hope this helps

ta t/f as ithough just hope the threds match rattler

Just testing.

[IMG][IMG]http://i1363.photobucket.com/albums/r707/rattler33/IMG_0831_zps1cf1b98
1.jpg[/IMG][/IMG]
hope this works[IMG]http://i1363.photobucket.com/albums/...ps1cf1b981.jpg[/IMG]
bonnet pins and pop up springs[IMG]http://i1363.photobucket.com/albums/...ps40a566e1.jpg[/IMG]
e/fan Renault 5
[IMG]http://i1363.photobucket.com/albums/...ps40a566e1.jpg[/IMG]
[IMG]http://i1363.photobucket.com/albums/...ps40a566e1.jpg[/IMG]
e/ign started sanding today rattler

hi done something wrong rattler

[IMG]http://i1363.photobucket.com/albums/...psf97d8249.jpg[/IMG]
bonnet pins and pop up springs

[IMG]http://i1363.photobucket.com/albums/...ps9e42859d.jpg[/IMG]

Glad to see you can get back into the forum. :cool:

Sorry I didn't test it again earlier, but I was outside working on my own car.

I've actually a length of similar cable tidying tube in black and it is good to see it in use.

Although I'm still a long way off worrying about the wiring. :rolleyes:

Good luck, Paul. :)

Another test.

Hi Dave, out of interest how do you go about registering the car in France? Do you need to B/IVA or vehicle inspection similar to the UK?

hi c not to sure at the moment but I think as it is over 30 years old and reg as historlc car it mite be poss we shall see I bet its lot of paper work rattler

[IMG]http://i1363.photobucket.com/albums/...ps6830b906.jpg[/IMG]
test

hi all arms ache first fill and all sanded today fine sand tomorrow soon be paint time.e/fan works a treat need a therm/switch cant see one on e/b need one with the little copper sender thatgoes up the hose any ideas rattler:thumb:

ok found a switch rattler

hi all just a update drove car today up and down our lane about 5 miles I am now like a dog with 2 c////// car goes in spray shop on wed hope to be all fin by end of april rattler

Dog with two....
 

Rattler, I have found a picture to illustrate how you felt, :-)


[IMG]http://i928.photobucket.com/albums/a...ps0e84e9f6.jpg[/IMG]

hi 22 nice cocks I am following your build with great interest good job rattler