Will it fit?
Take one of these:
http://www.talkaudio.co.uk/gallery/d...m/IMG_0184.JPG http://www.talkaudio.co.uk/gallery/d...m/IMG_0185.JPG And a borrowed bare chassis, and you get: http://www.talkaudio.co.uk/gallery/d...m/IMG_0186.JPG Bit tight, touching bits of the chassis on both side: http://www.talkaudio.co.uk/gallery/d...m/IMG_0187.JPG And on the back of the engine: http://www.talkaudio.co.uk/gallery/d...m/IMG_0191.JPG http://www.talkaudio.co.uk/gallery/d...m/IMG_0192.JPG After a bit of adjusting to get the driveshaft lines correct, gained a bit more clearance: http://www.talkaudio.co.uk/gallery/d...m/IMG_0190.JPG Doesn't really matter as that mount will be coming off anyway, not needed anymore. Bit more clearance around the gearbox too now, and the driveshafts are nicely in line: http://www.talkaudio.co.uk/gallery/d...m/IMG_0193.JPG Just need to get some measurements off one of the built cars, and maybe borrow a de dion so I can check clearance around that. But its deffo a goer now, superb :D |
For the uninitiated, what is that lump and what does it come out of?
|
Volvo T5
In all sorts of volvos, 300 bhp without any major work :) |
All times are GMT +0. The time now is 15:22. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022