Electronic speedometer.... 'Slotted Disk'
Hi guys
I’ve recently brought race tech electronic speedometer. It has a magnetic pick up and requires a steel disk with a number of slots to read the vehicles speed. Basically I just wondered if anyone knows of a company that’s able to make me a 'one of' disk with a certain number of slots in it?? Cheers Tom |
Try trigger wheels, they mainly do engine trigger wheels but I think theygave branched out a little. Other options include using an abs ring on your driveshaft or bonding some metal lugs onto the driveshaft or other rotating part. If you have 2 piece discs you can use the bolt heads as the trigger lugs if you can get the sensor in there safely
|
You colud try ETB instruments. http://www.etbinstruments.com/,
I would have thought that you should be able to calibrate the speedo regardless of the number of slots, as it should be adjustable for different tyre sizes/ diff ratios etc. |
Thanks for the replies
The Speedo can be calibrated however from what race parts told me it can only be calibrated so far. It requires a disk with basically the right number of slots for the tyre size and diff ratio. I am panning on fitting the disk around the prop shaft flange from the gearbox. I therefore need it to have the correct number of slot and also be a certain size. I’ll give both suggested company a call. I knew about ETB but not that they made ‘slotted disks’ Once again Thanks for your help Cheers Tom |
electonic speedometer
or try speedy cables, several years ago they changed a mechanical speedo to electronic for me and supplied the magnetic pick ups also.
MADMAN |
All times are GMT +0. The time now is 16:49. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022