Faking it: Jack hole covers
I have fake jack hole covers on my car. Not sure if anyone else is going down this route or considering it but if you are this was what I found as solution.
Whilst there are knobs you can find on cookers that look similar to real thing they are way too big - the originals are actually quite small. You can buy original repros but they'll cost 270 euros: http://www.okp.de/xtc2/images/produc...nh_Ferrari.jpg What I went with is approx same diameter as genuine and similar looking and it is......... a Stainless Drain Bung (yes really!) https://www.seascrew.com/suite_images/a1853820.gif http://i1282.photobucket.com/albums/...pstdplxvb1.jpg Very reasonable at £8.71 each including VAT so £35 for a set. The flange is bonded to the other side of the sill. https://www.seascrew.com/browse.cfm?...S&l=0000001120 You could easily file the raised turn grip down to get closer to the oem if you wanted |
Brilliant,
Thanks for sharing that Scott, I did mean to ask you where you got them from. Jeff. |
Just ordered 4, they even take Pay pal, result.
|
Good find, they look good even if you don't want a repro.
|
And being a marine part they should last very well in the elements!
|
All times are GMT +0. The time now is 03:50. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022