Fitted hinges to the bonnet.
https://i.imgur.com/tGvOAZah.jpg Also fitted the bonnet side panels. https://i.imgur.com/1zdP7vVh.jpg https://i.imgur.com/cSupGpSh.jpg. Both side panels need some sort of lip to cover the bottom edge but for now good enough for the MOT tester. :biggrin::biggrin: |
Mike – Do you have a final colour in mind for this pick up?
|
Quote:
Grey with black trim. Rust with black trim. I'll decide when it's complete |
I'v been looking for a pair of Morris Minor door tops to convert to fit the doors giving me an opening window.
But having been unsuccessful I purchased some thin steel channel and made a pair. https://i.imgur.com/DCQHp2Ah.jpg https://i.imgur.com/iXpzdBVh.jpg I also added an in-fill to the door top surrounds https://i.imgur.com/94XCx28h.jpg I re-enforced the door bottom which not only helped stop the fiberglass door flexing but also gave me some where to fit the window winder and door latch. https://i.imgur.com/llVjm1Eh.jpg https://i.imgur.com/6CtW0Ahh.jpg On the mechanical side we have now got it running better and freed off the clutch so the truck will now move under it's own power! No more pushing about :dance: |
Spent so time on the interior of the pick-up ready for the final fitting of the seats and belts.
https://i.imgur.com/LrXXvQRh.jpg https://i.imgur.com/S8o0dPoh.jpg |
The front of the truck was always to high.
https://i.imgur.com/6GcTVAVh.jpg So we replaced the front coil-over shocks with some smaller ones we had left over from the front of the "D" type. https://i.imgur.com/ukD1sFNh.jpg This shows the difference, left has the new smaller coil-over shock fitted. https://i.imgur.com/ggrpO9gh.jpg Again.:icon_cool: https://i.imgur.com/NeSdcMXh.jpg I think it's down about 50mm, just hope the front will clear the local speed humps!!!!:bounce: |
I'v been trying to sort out a safe way to fit the visor.
I finally settled on some exhaust bobbins which allow the air flow to pass under the visor . https://i.imgur.com/vozXOoDh.jpg https://i.imgur.com/f7RhKeKh.jpg I'll tidy the fitting up later. :icon_wink: |
I like that!
|
We wanted to get the truck all one colour to see what it looks like so we used primer.
https://i.imgur.com/Jqhq0tKh.jpg https://i.imgur.com/7UHVwlMh.jpg Still loads of work to do on the rest of the bodywork but the single colour shows the potential. :rockon: |
Mike – Getting the truck in one colour does make a big difference. :cool:
Also, good to see you are already making use of the pickup bed. :icon_wink: Good luck, Paul. :) |
Finally got it through it's MOT! :dance:
https://i.imgur.com/n6vMiPIh.jpg https://i.imgur.com/1IySg4rh.jpg https://i.imgur.com/nvOMjqsh.jpg https://i.imgur.com/6BP8lLRh.jpg Still needs a little sorting but it seems to drives OK. |
Congrats!
|
looking good
|
Respect!
|
Can't stop playing with it!!
Fitted a heater :biggrin: https://i.imgur.com/fwfkVE2h.jpg https://i.imgur.com/QinzYDYh.jpg https://i.imgur.com/FiWQOCBh.jpg The blower to the cab is brilliant but the de-mist sucks! . :rant: You-Tube test drive !! https://www.youtube.com/watch?v=iOUFmqEQT74 Now correctly registered with DVLA as Reliant - Pick-up - 2 seats - Grey ! |
Fantastic!
|
All times are GMT +0. The time now is 16:09. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022