Madabout Kitcars Forum

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)
-   Marlin 5exi builds (https://madabout-kitcars.com/forum/forumdisplay.php?f=11)
-   -   K series tepm gauge sender (https://madabout-kitcars.com/forum/showthread.php?t=2461)

limpabit 19th January 2010 15:30

K series temp gauge sender
 
Hi everyone.

Bit of a funny question. On the K series. Is the temp sender unit in the thermostat housing?

Any ideas of the thread size and tpi for it?

bigrich 19th January 2010 19:18

Hi John,

No...the thermostat housing is just that.

From memory I can't remember exactly where the temp sensor wire went and the car is well wrapped up in covers at the moment.

Any one else help?

Rich

SDMC001 20th January 2010 19:42

Hi Johne
At the back of the engine, there are two units, one as I recall tells the ECU how hot the engine is, the other invokes the cooling fan.

Steve


All times are GMT +0. The time now is 13:03.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022