Madabout Kitcars Forum

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)
-   Phantom GTR/Vortex Builds (https://madabout-kitcars.com/forum/forumdisplay.php?f=14)
-   -   Chassis Images (https://madabout-kitcars.com/forum/showthread.php?t=588)

bgullatt 19th April 2006 17:51

Chassis Images
 
Starting chassis design for my scratch built. Wondered if anyone had some good detail shots of their chassis. I have several chassis books but trying to get info on various mid-engine chassis as well.

Thanks,
Bill Gullatt
Harvest, AL - USA

bgullatt 25th April 2006 04:04

Clarification
 
I am mostly interested in seeing the wishbone setup on the rear. I can't decide if I should go the wishbone route or strut and trailing arms. In looking at the Contour (Mondeo) it looks possible that I can move the entire suspension to the rear and replace the steering with trailing arms.

ricola 25th April 2006 11:33

Bill,
The GTR uses a dedion rear suspension...

Rich

kenmorton 25th April 2006 22:31

Read an article recently about someone transplanting the front of a FWD to the rear as you describe. He set the steering arms up with ball joints and some sort of turnbuckle so he could alter the rear toe in/out depending on weather he was using the car for the road or racing.

Have you checked your p.m's recently ?

bgullatt 7th May 2006 10:58

In Madrid until 12 May. Hope to get started when I return. As I need a detail I will request specifics.

If you know where I could find the article with the front suspension on rear I would appreciate it.

Bill


All times are GMT +0. The time now is 05:34.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022