Madabout Kitcars Forum

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)
-   Marlin 5exi builds (https://madabout-kitcars.com/forum/forumdisplay.php?f=11)
-   -   The Dash (https://madabout-kitcars.com/forum/showthread.php?t=140)

marlinturbo 10th September 2004 12:12

The Dash
 
Hi,

I'm about to fettle and linish the dash to remove the seams and get a good fit...

has anyone put something like Folia Tech film onto the dash with any success...or has everyone left the dash the standard grey colour?

anyone got a link to the folia tech website pls?

thanks,

john

Ex-Biker 12th September 2004 16:19

I am in the same situation as you at the moment John.

Was thinking originally about painting, but fancied the idea of a carbon look.

Not sure the film would work that well with the contours of the dash. Anyone got any thoughts?

Also thought about flocking. I saw Car Builder Solutions at Donnington. They told me some one had flocked a 5exi dash through them. Anyone on here? They were quoting up to £200. Ouch!!

Has anyone done flocking themselves? Thought I might try that method. Frost (www.frost.co.uk) charge £16 for enough to do 1m sq. Even if I buy 3 it seems so much cheaper than getting some one to do it.

Sorry this doesn't help John, just more food for thought I guess.

tomboysexi 13th September 2004 20:09

Dash
 
Hi Guys,

I too have been looking at the dash covering and have had a quote to flock the dash and the 'tunnel' for £275. The quality of the finish is very good indeed.

I also have been looking at the Carbon approach, streamline carbon manufacture a sticky back version in two different finishes, cost to do the dash:- £170.00. Again people who have seen the samples say the quality is good.

Getting close to making a decision.

Thought you were finished by now Mark!

Regards Trev

holgate86 14th September 2004 22:33

dash finish
 
I've sprayed mine in stonechip and painted in charcoal colour, cost about £5, required less preparation due to how well it covers. I thought if i don't like it i'd sand it back and think of something else, but i'm pleased with the result. It also leaves me with more money for shiny bits. Brian

dylanp 18th September 2004 15:15

I've had the dash and the tunnel done by Neil Foreman (car Builder Solutions) and the result is absolutely amazing!

Not the cheapest solution but well worth the money in my opinion..

Dylan

Ex-Biker 29th October 2004 08:18

Frost Restorers are selling a kit to do the flocking yourself.

£16 with 300ml of flock.

They do it in 4 colours and you can buy extra flock in 1200ml and 2400ml bottles.

Looks pretty good value.

And until 31/10/04 they have 10% off if you order on the web.

www.frost.co.uk

rob180bhp 31st October 2004 21:21

How much flock would be needed to cover the average dashboard ?

thanks

Ex-Biker 17th November 2004 10:09

I believe a standard bottle of flock does a square metre.

I'm guessing 1 -2 bottles for a standard dash. The 5exi isn't exactly a standard dash though! Maybe 3 for this?

limpabit 12th April 2005 09:05

I've have bought a leather look bright red material for the dash. It should go well with black. Cost of about £10- 20 to cover dash. When I get round to dash I'll post some piccies.


All times are GMT +0. The time now is 19:17.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022