This is looking really good. I usually prefer a hi boy look, but you're doing a nice job on the fenders, they suit it and I prefer them for once.
Are you still going for the rust look? Shame about the gearbox adapter. I plan to use P9cho to connect an Alfa v6 to an rx box. Will have to make sure he's careful with the dimensions! Looking forward to your next update. |
Looking good Andy. You will be driving it before you know it.
|
cheers guys got to go rust or full on rat I can not do with he constant washing and ho god is that a blemish on the paint. bring on the patina paint :usa:
|
3 Attachment(s)
good weekend sanding and filling starting to shape up well, itching to get some paint on her.
Attachment 3575 Attachment 3576 happy I made the changes to the running boards it's going to look well cool. starting to think of adding some flames or pinstriping or what about this Attachment 3577 |
Looking very good!
Flames, naw...keep it simple. |
I like the skull
To fit with the rusty patina'd look how about this http://www.bing.com/images/search?q=...3o0&ajaxhist=0 |
Can't go wrong with flames and skulls on a hot rod.
|
it drives
5 Attachment(s)
well I got fed up with pushing the car out the garage to work in the sun so set about the mechanics for some reason it starts but I have No clutch.
I worked out it was not enough leverage so added a nut to the back of the pivot Attachment 3654 this worked but caused the arm to hit the clutch not a lot but to much but some clutch improvement so I removed the nut and did this Attachment 3655 Attachment 3656 this worked out a lot better it did not hit clutch anymore but again could be better, so I extended the piston arm to the clutch master to try and get a bit more fluid Attachment 3657 again better but no cigar so next I swapped out the mazda servo for a landrover we now have a car the moves under its own power not me pushing it Attachment 3658 happy days pain in the arse taking the box in and out but sorted :smokin::smokin::smokin::smokin::smokin: |
paints arrived
4 Attachment(s)
only done a few bits on the body, bonnet split again now fitts proper job just needs re finishing
Attachment 3660 had to try the light shells Attachment 3659 I added a skirt to the back I want to run some lights on it and a number plate.I also removed the hinges from the back door and bonded it on ,well it was never going to be used as a door and looks better Attachment 3661 and the paints arrived so I now do need to pull my finger out Attachment 3662 |
Andy - This is really coming together nicely. :cool:
Congratulations on getting it driving again. I am looking forward to seeing how this "rusty" paint works. Good luck, Paul. :) |
Cool paint!
|
Looking good Andy. Wil it be ready for the NSRA Supernats in August?
|
That rust paint sounds interesting reading about it
|
major car surgery
4 Attachment(s)
cars coming along nice I actually drove it yesterday it even stopped when I pressed the brake pedal :pray:. BUT the driving position needs work so all the pedals and the steering is back out. I have moved the steering up and right a bit sound easy but not when it's all been welded into place.
Attachment 3675 Attachment 3674 I am going to move the fire wall on the driver's side forward about 6" and lift the servos up to clear the engine Attachment 3673 Attachment 3672 I should be able to cut some of the bend out of the pedals and make them longer, hopefully when finished it should give me more legroom and a better driving position. 1 step forward 3 back better now than later :decision: |
update
5 Attachment(s)
I have been doing bits in between other jobs first time in ages I have spent a weekend on her so here we go
fire wall is all back in pedals refitted and all plumbed back up I have gained about 6" in leg room so driving position is better. Attachment 3847 Attachment 3848 Attachment 3849 I had to flip the brake pipe connections from one side to the other on the servo to get it in as it was a bit close to the exhaust. hindsight I should have made the box higher. I also decided I did not like the dash so the had to go Attachment 3850 new dash in or should I say in progress Attachment 3851 The clocks are RX8 which means the electric drive from the gearbox should work for the speedo, glove box from the old scimitar |
exhaust
5 Attachment(s)
been fancying a side exhaust so this weekend I cut up what was the manifold and made everything shorter and to come out above the running boards
Attachment 3854 Attachment 3853 Attachment 3855 Attachment 3856 I did plan to use motor bike silencers but now I am thinking of a bit of flexi tube and a side exhaust running along the side of the running board like you see on the cobra.think rat look bit of rusty pipe running across the board would look mean. lol |
and we have a seat
5 Attachment(s)
well I got fed up with sitting on a box and moving it from one side to the other as I worked on the dash, so I decided to get the seat in
Attachment 3867 Attachment 3868 Attachment 3869 still work to do as always I have made the base to be removed as and when the back is glassed in. I did try the back from a VW beetle but it was taking up to much room. I have got a padded quilt cover with the american flag on going to look well when its fitted. Attachment 3870 Attachment 3871 bit premature but had to try a bit of paint on the unfinished dash love the colour it goes on well even with a paint brush :peace: |
5 Attachment(s)
I will stop changing things one day and finish it , been watching welderup again and decided I could not live with the standard door so gone for the suicide look again.
Attachment 3966 absolute nightmare to do when I cut the body I did it on a slant thats ok till you try to flip the door hinge then it will not open it just slams into the sill. in the end after 3 days on I came up with this Attachment 3967 three hinges top one fixed bottom two lift clears the sill and shuts spot on, locks on order that's next weeks job. bought some triumph silencers just hoping they will work may need to take the baffle out . bore is only 30mm the down pipe is 40mm so I needed to make a filler . que scaffolding tube Attachment 3968 and finished looks like this Attachment 3969 Attachment 3970 fitts a treat bit of joint compound and a clamp job dune , need to think about securing the box to the sill so it will move with the engine . wiring loom on order I have spent hours trying to get the loom sorted for 80quid should have bought it weeks ago u live and learn:icon_eek: |
long awaited update lol
5 Attachment(s)
still plodding on with the hotrod most of the wiring is now sorted we have all working lights and it starts and runs on the key and even drives . Utube link below would not let me add a video
https://youtu.be/tG0j64pSCKk the clutch is pants only just biting and the gears are stiff so I dissed the slave and just used a monkey wrench off the clutch leaver and a bit of rope. all gears fine but only biting at the very top so looks like the clutch is on its last legs but the slave has to go.The piston on the slave dose not travel enough both ways to work the clutch properly. Attachment 4454 so next job fit a cable clutch ebay new cable 8quid and a bit of old cross member I came up with this,woks grate but will still need a new clutch bugger. Attachment 4455 doors rehung again suicide, open and close brill this time I made up my own door handles after the ebay ones were crap, any guesses for what they are yes I know they look rough but its a rat rod Attachment 4456 Attachment 4457 rear lights from the states Attachment 4458 exhaust next week I have bought two newish manifolds I am going to direct it under and out the side well thats the plan. |
my girls soaking up he sun
1 Attachment(s)
|
All times are GMT +0. The time now is 00:48. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022