Craig,
Bit of a daunting moment for me fitting the screen...one shot deal.
I didn't use any rubber sealing strips in the end (but I know others have).
1) Dry fit screen and check packing / gaps are even (I packed teh screen away from the scuttle base by about 5mm)
2) Tigerseal on roll cage & scuttle (big enough bead to seat screen on
3) 'Hinge screen' onto bead from the scuttle edge
4) Tape into position and fill bead gaps with Tigerseal
5) Shape bead (quick cos it dry's fast and sticks like s**t to a blanket)
5) Finish off scuttle front edge with silicone (easier to shape)
6) Fit screen cap to hide any excess sealant
.....hope this helps
Rich
|