As the engine get close to installation, I have returned to the loom and the general wiring as I now have the donor loom on the floor so to speak.
The engine loom appears, with a bit of work a 'done deal' but the security module the 5AS is a black art with its TTL and DC signals as well as lots of wires that appear not to be detailed anywhere.
I have looked back in the threads for this detail but it appears that detail was passed between people off the forum.
Marlin do a 5AS loom I believe but I see no drawing detailed of the layout of the essential connections.
This web site may help if you are completely in the dark, it does not have the ABS circuits but does detail the internal wiring and operation of the 5AS the MFU(don't think we use this bit) and the VVC circuits. A wonderful piece of work to credit to the author.
http://homepage.swissonline.ch/TomsS...ation2/Map.htm
I would be interested in knowing if this is all I need to connect to get the engine running for more than 9 seconds at a time, once I get the point of trying that is...!
eaa53