Hi Benny.
Going by your comments I'm assuming your going for a K series 5EXI. what are the relays you need to know? There is a relay already on the wiring loom (I think this for the cooling fan). There is a spare space for another relay (I think for hazards). You will need to get a intermittent relay for the wipers. If you check the posts in the forum you will find the details for this.
If your talking about the starter , etc relays, then I'm not too sure. but I can tell you how I did mine for the turbo. The turbo does not have the 5AS unit. What I did was cut off the two engine wiring loom connectors and marry up the engine loom, 4 relay box from a 216 bubble and the marlin loom (still on going by the way).
I thought the same was you re the fuses. But assumed if needed Marlin would have implemented them into the fuse box ansd another fuse box.
Sorry can't help with the 5AS.
|