Zetec inside?
A zetec will fit in a roadster. Its been done several times.I am sort of planning it but work and stuff have got in the way so far.
As has been said there is a wealth of info, zetecinside.com is a good source.
Mention has been made of potential exhaust issues as a Pinto is opposite handed but unless your chassis was factory altered for a Pinto I would guess that all the relevant holes and brackets for the B series are in place.
There are several issues with ancilleries but considereation must be made for the steering column that runs down the inlet plenum side of the engine.
Either carbs or injectors can be used given that some form of aftermarket ECU will be needed.
I have collated a bitof documentation that I could share if you could pm your email.
Good luck.
|