i came back from holiday today to find a pair of Land Rover seats sat outside my garage. A gift from a friend.
I placed them in the G46 and noticed a possible issue, the width.
and possible the height of the backs
I have been trying to read the threads on my phone while on holiday but it is challenging to see any detail in the photos. I thought I had seen a lowered floor pan that ran from the depth of the rear foot well forward and thought this would help but when I checked the car there was a great lump of chassis in the way.
From above you can see the lowered foot well and also not the two bolt holes just in front.
From below you can see the black shiney underneath of the foot wells and the big silver lump of chassis that those two bolts went into.
This is as low as the seats are going to get
With a bit of careful bolt extraction the seat backs can be reclided
This allows a better fit height wise but it still looks like I will need different seats though