Feels like not much done this eve. Rear tray screwed and stuck on with polyurethane cobsructional adhesive and self tappers. I also added a bit of grp up the sides as I hope to bond these to the roof section.
Final fit and fix of the rear tray, again on poly, with ss bolts and penny washers. I also put some stews through the bottom of the tray and into the metal strip that is above the abs. Bumper thing.
I blanked of the lights and old petrol filler. Trying to keep the boot reasonably air tight.
In between that I did some filling and fairing on the lower parts of the body shells cos its easy to get to whilst upside down.
Maybe didn't do so bad after all. Well I've had a beer now
[IMG]
![](http://i250.photobucket.com/albums/gg263/Seanick_bucket/104034610_photobucket_169049_.jpg~original)
[/IMG]