Before I bonded the door skins on to the door frame, I lined the inner skin,
with alloy, but on the passengers door, this had the effect of warping the skin curve so it would not fit the frame, but after a lot of heating, twisting and clamping, I did get the skin to fit, but the down side was all the dents and marks that the clamps had left on the outer surface.
Today I flatted the door and filled it all.
Then I got the bonnet and both doors, and gave them several coats of high-build primer, which when flatted, should give a reasonable surface for the topcoat.
My camera had a glitch, and I lost several pics of the work, but took a couple more of the finished bits.
All in all, a good days work, as for a change I did all I had planned to do.
pics:
[IMG]
[/IMG]
[IMG]
[/IMG]