Friday Afternoon:
Thankfully, by the time I could go outside and do some more car work, the matting was set nicely.
So I removed most of the brackets.
Cleaned up any stray matting around the screw holes.
( Sorry the photo is blurred. )
The final piece for this section came from a different part of the arch and isn't a great fit.
So there will be some grinding required on the 'sunny side' when I start healing the wounds.
Still, with that section in place, I could add more tape over the screw holes and get ready for the next batch of 'glassing.
As I said before, this return lip will be trimmed back when the arch is complete.
And this is what the inside of the arch look like now.
I know it takes longer doing this in small steps, but there is no point in rushing things at this stage.
End of Part 2…