Mike & Molleur - Cheers chaps.
As for the reversing light, I've removed all the reversing light wiring, so I will stick with fog lights for now.
( See below. )
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Dave - The external wires are OK.
But looking at the LED light pattern, I guess there is a circuit board of some sort in use.
So even though there are no lights in the centre of the reflector, I guess there is something 'important' in the middle.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Friday Plans:
Plan A was to use the car to drop off some Christmas presents to my mum so she could see it painted.
Then I would see if I had enough time to reshape the edges of the replacement LED reflector that arrived yesterday.
Unfortunately, there was a light mist all morning, when meant I had to take my Mondeo instead.
But by the time I got home the weather had finally started to clear up a bit, although it was still grey.
So I managed to get out for an hour, which is around 15 miles in traffic, but I had a few good bursts in the middle.
Stopped off on Harrow Hill for a few photos on the way home.
Then decided to turn up the final slope to the church on the very top (where the Harrow Job video ends).
There I was greeted by a small crowd all very well dressed and a professional photographer clicking away.
Turns out there was a wedding about to start, so I quickly turned around.
Thankfully, I managed to get out of the way just as the bride arrived.
So just time for one quick photo and I was on my way.
So that's all for now, cheers, Paul.