Thread
:
volvo p1800 into ferrari 275gtb nart spyder: v12, 5spd, tube chassis
View Single Post
#
66
10th January 2018, 22:15
275NART
Senior Member
Join Date: Mar 2015
Location: South Carolina, USA
Posts: 116
Next I have started on the rear axle. As I may have mentioned earlier it is out of a late 90s ford explorer. Disk brake 3.73 gears, 31 spline axles. It was originally 59.5" but by cutting down the driver's side axle tube and using another passenger axle I could make it 56.5" to match the front axle width.
no turning back now...
Using a little angle iron on either side allowed me to keep everything true while I tacked it up. I used a straight edge on the axle tube all the way around the circumference to double check as well.
Now I can move on to fitting it up in the car with adjustable link bars and brackets.
275NART
View Public Profile
Visit 275NART's homepage!
Find all posts by 275NART