Before I bond the door skins onto the MR2 doors I wanted to go back and revisit the door rods connecting the Ford handle to the MR2 rod. The action wasn’t great and a bit hit and miss from when I did this last year so I ordered some new 4mm 150mm length stainless rod and redid them.
Trying to make this as robust as possible I used a couple of central locking rod connectors drilled out to accept the 4mm rod and the existing MR2 rod.
Action feels much better and that’s even without putting a cable tie around the rod on the Ford handle which I will get round to today when the rain stops. Thanks Nostromo for the help here.
Can get on with the doors now.