[peterux]

Originally Posted by Amir Manzoori

Welcome back to the world of bespoke cars.
Like me, I am sure there are number of Royale Sabre lovers out there waiting to see more of your build.
Had an idea which I thought to share with you;
We all try to keep water out of the passenger compartment, and one place which is very hard to do anything about, once the build is complete, is three windscreen wiper spindle and the washer jet. Moving the washer jet onto the bonnet just above the heater, one on each panel, and filling the original hole, and fitting a gutter like channel to run under the three wiper spindles, which has to be done before the dashboard is fitted, with drain pipe either side which can then be guided out through hole in the floor.
Good luck and see you soon.

Thanks for the welcome back, I'm hoping to make better progress this year! Thanks for the tip about water leaks around the wiper spindles. I had not heard about this issue on Sabres. I'll try to remember when I get to that part of my build which is some way off