Quote:
Originally Posted by JoeB
I will have a look at all the notes I've got on the switches and put a post up soon.
Currently working on some new gauges too that will be for the tribute dashboard for the 250 swb.
A H gate could be made to fit the existing gear surround with a bit of time and patience. Measuring the angles of the gear stick through each motion was the hardest part.
|
May I suggest some blue painters tape.
Place the gear lever in each gear and align a piece of tape next to it.
Carefully remove the tape and you will have a beginning pattern. Make it in cardboard and see if any modifications are needed. Transfer to whichever material you choose for the gate and Bob's your uncle.