Bit more interior work over last few days ....A pair of fibreglass buckets from Tribute Automotive were fitted to slightly modified seat runners that came with the donor vehicle.
I also fitted a floor mounted dipper switch , a Moto-Lita steering wheel was supplied by Ray ..its a non dished item and it meant I had to tweak the steering column mounts and cut a small semi circular notch from the dash to raise the column slightly to give the wheel room without compromising leg room etc. The flat 4 spoked design also put it a bit closer to the dash than normally , so I removed the rear of the mountny boss and fitted a 12mm spacer made by my mate in the rear and re-assembled with slightly longer machine screws ...its an invisible mod that doesn't affect the way its mounted , but it brings the boss 12mm closer to the driver ...
