The 275 project is progressing.
So far we have finished the buck, and the moulding stage is almost complete.There are just a couple of small parts left to mould. We then made the gray back end to continue the development of fitting panals and the roll cage ect. The gray back end will become the buck for the convertible.
We then made kidge's blue panels, which we have fitted up to one of our z3s.
Kidge has asked us to modify his kit. The front end has been split through the front grill, so the lower valance remains attached to the car along with his bumpers. The bumpers have been moulded, so fibreglass bumpers are available. Frameworks had to be made to support the added weight of the metal bumpers.
We have also produced extra items such as a headlining, lighting recesses and grp undertray.
Kidge should get his kit by the end of the week.
We are still only planning to release a convertible version of this kit at the moment,and we are unsure as to when we will start work on the convertible. When we do,it will have to fit in around paying work.
When the kit is complete it will be available to order exclusively through old no7.
