Quote:
|
Originally Posted by holgate86
I've fitted my front discs and pads, I needed to modify the caliper brackets because they were for solid discs and required the slots opening out. The rear discs won't sit over the hub flange because the centre hole is too small. If i'd known that before fitting flanges I could have modified them but now i'll have to get the discs altered to fit.  hth brian |
That makes some sense of the front fit.
It looks like I need to shim the gap between the mounting bracket and calliper, again due to fitting vented discs.
Rear seemed to be ok with mine, bar a little gentle persuasion (hammer). My problem with the rear is the handbrake bracket catching the upright. Mark made a piece to fit this originally and has promised to post me a pair.