Friday - Part 2:
When I was preparing the extra plywood panels for inside the boot, I discovered one of the original ones was loose.
( Yet another piece of damage I caused when the car fell off the stands.
)
So i removed it completely and then rather than fit two panels, I cut a new larger panel instead.
Every time I've used bonding paste it seems to get everywhere, so I was not taking any chances.
It has been a while since I last messed about with cut down milk cartons and catalyst.
The job was as messy as I expected, but at least the little and large panels are now in.
Just as the sun was setting, I removed the weights from the grille.
And this is the view from the front.
Which leaves me with just a few small jobs left before I can book my MOT appointment.
Until next time, take care, Paul.