Been busy on the miller making a couple of C spanners to adjust the Spax front shock height, made from 6mm ally plate.
IMG_5388.jpg
Today the Midi type car fuse holder arrived from flea bay, if you want one it's
Here, also bought a few spare fuse's just in case.
IMG_5387.jpg
The fuse size i've gone with is 40 amps, there are other sizes available.
IMG_5389.jpg
Its fitted to the bulk head taking the 12v supply from the battery post on the starter solenoid and feeds the main fuse board with 12v, it's basically an extra safety precautions for the fuse board.
The solenoid in the picture is for radiator fan supply, i may fit a small deflector plate above the midi fuse holder to prevent water ingress off the bonnet shut lip.
The next job is to wire in all the switches and clocks on the dash board along with fitting the coolant hoses so that i can run the engine.
Well that's it for now see you all soon.