Thread
:
Nubobi automotive - 250 swb grille
View Single Post
#
6
10th April 2016, 14:58
Nubodi Automotive
Senior Member
Enthusiast
Join Date: May 2014
Posts: 607
A small amount of filler was added to the corner after filing down. These were then sanded prior to spraying. I could have welded the corners but it would have made it difficult to get the gauze in afterwards. I used a tin of Hammerite smooth silver and painted both sides with 3 coats. The gauze was then painted with satin black paint with an artist’s brush.
Nubodi Automotive
View Public Profile
Find all posts by Nubodi Automotive