Barber - Thankfully it was an easy fix.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
I Can See The Light…
By chance, I ended up buying a box of stop/tail bulbs during the build.
So it should have been a straight forward job to replace them.
Driver's side - OK.
Passenger side - Brake light filament comes on instead of tail light.
Not sure how that hadn't been picked up before now.
Still, it was easy to take the plug from the light fitting...
And swap the green and red wires over.
Which fixed the problem and the tail light filament came on.
Looking at the rear lights from the back, the passenger side is at more of an angle than the driver's side.
So I guess that is why the difference in light intensity wasn't picked up.
With the car unwrapped, it seemed rude not to take it for a quick spin.
Note:
One day I will remember to sit on the passenger side after I climb out and then take a photo.
With a stop for petrol and the photo above, I only managed 16 miles in around a hour.
Still, at least that was enough to break the 600 miles since MOT mark.
Until next time, take care, Paul.
