Firing on three cylinders
Hello all,
Some advice/help needed...
My Sylva Striker 4age (Omex open loop) is only firing on cylinders 2,3 and 4. One day in the summer, cylinder 1 just stopped working. I know this because the exhaust primary pipe stays cool instead of red hot, it sounds uneven, and is down on power. It still goes like stink on the three cylinders (I just unplug no.1 injector to use it) but it is obviously nothing like what it should be.
Would really appreciate any help, advice, crazy suggestions (the crazier the better) or obvious ideas to help with this.
Many thanks in inticipation.
Peter Robinson, Sutton Coldfield, West Midlands
PS this is not a spoof - I don't know what to try at this point!!
|