May have similar problems as mine even though nutter is using SEAT components instead of Rover.
I would contact Marlin, Craig and ask them if it should be mounted at the rear of the hub. Ask for some photos of how they should be mounted (good luck I did not get any).
When trying to mount on the front of the hub, the bashed on the lower wishbone at ful droop.
As for pressing out the hubs, IAN (Merlnman) had a 5 tonn press to help them out with. Not clued up up these things but used some iron to press the hubs out.
Garage may do it for a small fee.
|