Hi Ian. Sorry to hear that you had some issues fitting your roll cage. It's a bit odd as all the cages are fabricated on our stripped out MX5 "jig" shell. Try loosely fitting one bolt per flange first, then you may need to put a screw driver in the holes to line up second hole, then tighten the first bolt up to hold the flange in the correct position, then insert the second bolt. From experience gained from the cars we have built the trickiest bolts are the 4 at the head of the windscreen, they don't enter the bodywork at 90 degrees as expected, but vertically, if you see what I mean. Give me a call if you need anymore pointers.
|