Thread: Fuel Tank
View Single Post
Old 10th April 2004, 10:24
tony-g tony-g is offline
Join Date: Mar 2004
Posts: 95
tony-g is on a distinguished road

A swirl pot is not that hard to fit in a tank. I fitted one in the robin hood 2b I built. As it is only a small box that the pump pickup sits in, with holes drilled in it . this allows fuel to fill it but restricts the flow out during fuel shifts. It can be secured to base of the tank with a single bolt, which is easy to seal. A tin can is ideal of dia. aprox of pump aperture hole size, cut down to about 60mm hight

tony gigg
Reply With Quote