Hi Peter
Thanks for the response. I am pretty certain my Hunter with its original Sierra/Metro servo setup doesn't have a limiter in the rear brake circuit. I guess I will have to have a play around with it when I come to fit the servo.
To be honest I would be amazed if there is a problem, if Mike and the others didn't have a problem with rear disc setups locking, rear drums should be fine as they are less efficient than discs.
The only problem might be extra pedal travel if there isn't a valve on the rear drums, the MB website seems to indicate this is the only reason they fit the residual valve. I will just have to make sure it doesnt cause binding when the brakes are hot if I decide to fit one.
John
|