Sir, you have a gift!
<<<Would like to move engine rear wards>>>
I THOUGHT about moving moving a small Triumph engine back a few inches, but many years ago and I don't have your skills. The easy way SEEMS to be to reverse/swap the front suspension turrets over, which would move the engine supports back a bit, using spanners ... but I don't know if its that easy. Another problem was that the clutch housing is too big to move back, as chassis rails get closer together. But look at the MG Midget 1500, which shares the Spitfire engine. I believe there is very limited space in the MG transmission tunnel.
I often wondered about extending the Spitfire rear suspension tie-bars forward to connect with the chassis, which would take the floor pans out of the MOT equation.
Power to your elbow.
602
|