I'm running the latest software version (3.1.2 I think).
Under Misc/ECU there are four options:
Immobilizer enabled
OBDII
Purge system
ELD
Apart from Purge they are all off (OBDII being the one that disables the secondary O2 sensor). Choosing this stopped errors about the Secondary O2 Sensor voltage, but not for the Secondary o2 Heater malfunction (which I assumed it would as if you have no sensor you have no heater for it!).
I'll turn off purge if that's working on your system.
Thanks for the info - I may try turning OBDII back on then off again and see if that works.
Tim
|