Bolt down ones. Two M6? bolts diagonally opposed
Ive done the plugs at 0.8mm
removed each coil one by one and there is a noteable difference (proper misfire)
as I remove each one. So i don't think it is the coils
I'm wondering if it gets starved of fuel at high RPM, as Im only using the swirl pot It may pick up "air" as the swirl pot isn't being topped up from the main tank.
Will need to get a fuel gauge in the main tank, then run it all from that, and see if the problem goes away.
It runs sweet at idle, so I think that is the cause
Cheers
Steve
|