View Single Post
  #189  
Old 3rd September 2019, 12:35
deni deni is offline
Senior Member
 
Join Date: Jun 2015
Posts: 208
deni is on a distinguished road
Default

I am planning to use original engine side panels to mount the radiator. I've temporarily placed old radiator to the panels using cable ties to check how it all fits. The top of the panels will stick out, so I have marked the area that could be trimmed to fit under the bonnet.


IMG_2122.jpg

IMG_2121.jpg


I hope that the radiator is positioned high enough, using mounting points (holes for the bolts) below the top ones that will be removed (I think these are original mounting points). It will sit a bit higher when it's connected to the top hose, but it seems that the fan sticks out a bit, just above the top of the radiator. Hope that this is ok…any advice is welcome.
Reply With Quote