It seems that my 23mm Bendix master cylinder is for a Mondeo 2.0L 01- on.
However having trawled back through earlier posts I see that the 22mm Sierra master cylinder seems to be the more usual one fitted to the Cabrio and I am thinking of changing to that size if replacing it but don’t want to have excessive pedal travel.
So I have another question that wasn’t realy answered back then. What is the Cabrio pedal travel with a 22mm master cylinder and discs all round?
In my original post #220 I gave the following measurements:
With engine off. Pedal pumped several times (i.e. no vacuum /servo action).
Free pedal travel = 13mm
Total pedal travel with fairly hard push = 63mm.
With engine running at tickover.
Total pedal travel with fairly hard push = 90mm.
Handbrake when on works at 3-4 clicks but fully off for all above checks.
I have 10” (Sierra V6 / Sapphire?) vented discs at front and rear discs are solid 10” (Sierra 4x4 ?)
I would appreciate it if anyone with the same disc / disc setup as above could measure their pedal travel and let me know. Peter.
|