View Single Post
  #3  
Old 27th February 2019, 07:28
DaveP DaveP is offline
Senior Member
Enthusiast
 
Join Date: Jun 2015
Location: Reading, Berkshire
Posts: 688
DaveP is on a distinguished road
Default

Hi and welcome. On the Kobra the inner boot panel is first sikkafkexxed and tech screwed in place and any fettling to get it right performed. Then the rear tub is fixed to the b-pillars as you know whilst being fixed and tech screwed along the remaining metal chassis / body along the back of the hood. You also glue to the the inner boot panel and finally a couple of brackets behind the rear wheels.

This needs a few hands and weight to achieve. Look for my build thread on here where I build my Kobra as a couple of pics mid thread show the car waiting for the Sikka to go off.

Hope this helps.

If you need more support and close to purchase I would recommend contacting either Tribute direct or their build agent Classic Coach works who have built Kobras and SWBs and can offer guidance.

Dave
Reply With Quote